Turning of the Week
Image
Newest Challenge
Image

Have you checked out the
Gallery yet? Our members have posted some of their very best work for you to see – all in one convenient location!

Jet 1642 lathe for sale --SOLD--

This forum is for NON-commercial advertisements to buy, sell, or trade woodturning related items.
carl mesaros
Posts: 31
Joined: Mon Feb 18, 2013 6:00 pm
Location: Coshocton, Ohio

Jet 1642 lathe for sale --SOLD--

Postby carl mesaros » Tue Mar 24, 2015 6:37 pm

Jet 1642 1/1/2 hp. Includes all standard accessories.
Approximately 4 years old. Time left on warranty.
Excellent condition.
Located in east central Ohio. Phone 740-622-9787.
$900.00

User avatar
Mike Cruz
Posts: 3117
Joined: Mon Feb 04, 2013 6:25 pm
Location: Western Maryland

Re: Jet 1642 lathe for sale

Postby Mike Cruz » Thu Mar 26, 2015 2:31 pm

Sounds like a reasonable price. Not in the market or even close enough, though. Aren't these around $2,300-2,500 now (new)?
Wood hoarder, and proud of it!
GO-TO caliber: 357 mag

carl mesaros
Posts: 31
Joined: Mon Feb 18, 2013 6:00 pm
Location: Coshocton, Ohio

Re: Jet 1642 lathe for sale

Postby carl mesaros » Fri Mar 27, 2015 8:25 am

Yes Mike the 1642 lists for about $2300.00
I'm selling because "I think" I need a larger lathe.

User avatar
Mike Cruz
Posts: 3117
Joined: Mon Feb 04, 2013 6:25 pm
Location: Western Maryland

Re: Jet 1642 lathe for sale

Postby Mike Cruz » Fri Mar 27, 2015 2:38 pm

You do! ;) EVERYONE needs a 'larger' lathe. :D
Wood hoarder, and proud of it!
GO-TO caliber: 357 mag

Tim Johnson
Posts: 2
Joined: Wed Apr 08, 2015 12:10 pm

Re: Jet 1642 lathe for sale

Postby Tim Johnson » Wed Apr 08, 2015 12:21 pm

Do you have any pics and where are you located?

carl mesaros
Posts: 31
Joined: Mon Feb 18, 2013 6:00 pm
Location: Coshocton, Ohio

Re: Jet 1642 lathe for sale

Postby carl mesaros » Wed Apr 08, 2015 6:49 pm

Tim I haven't taken any pics of the lathe to post yet.
I may have the lathe sold and if so I'll post a note to verify that in a couple of days.
If not I will try to post some pics. ( haven't posted pictures on this site yet)
I am located near Coshocton, Ohio about 75 miles due east of Columbus.

Tim Johnson
Posts: 2
Joined: Wed Apr 08, 2015 12:10 pm

Re: Jet 1642 lathe for sale

Postby Tim Johnson » Thu Apr 09, 2015 8:15 am

Thanks for the info. I will check back in a day or two. I am about 3 hours away, so not too bad of a drive.

carl mesaros
Posts: 31
Joined: Mon Feb 18, 2013 6:00 pm
Location: Coshocton, Ohio

Re: Jet 1642 lathe for sale

Postby carl mesaros » Wed Apr 15, 2015 7:45 am

The jet 1642 lathe has been sold.


Return to “Classified Ads”

Who is online

Users browsing this forum: No registered users and 1 guest